Aide à la sélection

FGAC-T-032A-V-0.0M
22060000042

Charging device socket outlet for charging electric vehicles (EVs) with alternating current (AC), compatible with the national standard AC vehicle charging device plug for installation in EVs

Comparaison

Type de produits

Seuls 4 produits peuvent être comparés à chaque fois. Veuillez sélectionner les produits que vous souhaitez remplacer.

    • Aperçu
    • Caractéristiques techniques
    • Accessoires
    • Certification
    • Caractéristiques commerciales
    • Télécharger

    Les certificates des produits

    Les avantages des produits

    ☑All Degson's vehicle sockets and charging pile power sockets adopt a unified design
    ☑The surface of power and signal contacts are silver-plated
    ☑Certified to IATF 16949:2016
    ☑Ergonomic and easy to operate
    1. Modèle 3D
    2. Environmental conditions
    3. Electrical characteristics
    4. Mechanical properties
    5. Installation
    6. Marking material
    7. Lock actuator
    8. Bag
    9. Temperature Sensor
    10. Environmental Product Compliance
    11. Connection capacity
    12. Cable
    13. Dimension

    Modèle 3D

    Environmental conditions

    Maximum altitude5000m(Above sea level )
    Ambient temperature (operation)- 30 °C ~ 50 °C
    Ambient temperature (storage / transport)- 40 °C ~ 80 °C
    IP classIP54(protection cover)

    Electrical characteristics

    Maximum charge power8KW
    Phase3
    Power contact rated voltage440
    Quantity of signal contacts2
    Signal contact rated current2
    Signal contact rated voltage30
    Signal transmission typePulse width adjustment
    Connection method precautionsCrimp connection, cannot be disconnected
    Temperature measurement2x Pt 1000 (DIN EN 60751)

    Mechanical properties

    Insertion/pullout cycle10000
    Insertion force< 100N
    Pull out force< 100N

    Installation

    Available installation locationInstallation in front of the board
    Limit of the installation locationOnly allow 0 to 90 degrees frontal tilt
    Lock actuator installation locationTop center
    Mounting hole diameter7.00 mm (ø)

    Marking material

    Shell colorblack
    Customization basisProvided according to customer requirements
    Contact surface materialAg
    Marking materialPlastic

    Lock actuator

    Lock typeSecured by locking device after insertion

    Bag

    Dimensionø350*100mm

    Temperature Sensor

    StandardDIN EN 60751
    Recommended measured current1 mA (1 V at 0°C )
    Recommendation to measure tolerance on current sensors±1K
    Temperature range_50 °C ... 150 °C
    Temperature coefficient (TCR)3850 ppm/K
    Long-term stability(maximum R0-Drift)0.06 % (After 1000 hours at 130°C )
    Shutdown temperature90 °C Equivalent to Pt 1000 value 1346.5 Ω

    Environmental Product Compliance

    REACHconform
    China RoHSconform

    Connection capacity

    AWG26~10AWG

    Cable

    Cable composition3*6mm²+2*0.75mm²

    Dimension

    Vehicle connector height101mm(Vehicle charging connector)
    Vehicle connector width75mm(Vehicle charging connector)
    Depth63.2mm
    Hole diameter60mm x 60 mm
    Wire length0m
    width76mm

    CQC parameters

    Overvoltage category/Degree of pollution III/3
    Rated voltage 440V
    Rated current 32A
    IP class IP54
    Numéro de la commande 22060000042
    Unité d'emballage 5pcs/box
    Quantité minimale de commande 5
    Le poid de produit (sans emballage)
    3D
    FGAC-V.stp Télécharger
    CAD Data
    FGAC-T-032A-V-03-0.0M-22A(H).dxf Télécharger
    Data
    FGAC-T-032A-V-03-0.0M-22A(H).pdf Télécharger

    Produit similaire

    Consultation en ligne
    FGAC-T-032A-V-0.0M_Prise de charge du véhicule _Prises de charge _Charge pour l'électromobilité _DEGSON高松,全球知名工业连接器产品和整体解决方案提供商
    Aide à la sélection

    FGAC-T-032A-V-0.0M-22060000042

    Charging device socket outlet for charging electric vehicles (EVs) with alternating current (AC), compatible with the national standard AC vehicle charging device plug for installation in EVs

    Comparaison

    Type de produits

    Seuls 4 produits peuvent être comparés à chaque fois. Veuillez sélectionner les produits que vous souhaitez remplacer.

      • Aperçu
      • Caractéristiques techniques
      • Accessoires
      • Certification
      • Caractéristiques commerciales
      • Télécharger

      Les certificates des produits

      Les avantages des produits

      ☑All Degson's vehicle sockets and charging pile power sockets adopt a unified design
      ☑The surface of power and signal contacts are silver-plated
      ☑Certified to IATF 16949:2016
      ☑Ergonomic and easy to operate
      1. Modèle 3D
      2. Environmental conditions
      3. Electrical characteristics
      4. Mechanical properties
      5. Installation
      6. Marking material
      7. Lock actuator
      8. Bag
      9. Temperature Sensor
      10. Environmental Product Compliance
      11. Connection capacity
      12. Cable
      13. Dimension

      Modèle 3D

      Environmental conditions

      Maximum altitude5000m(Above sea level )
      Ambient temperature (operation)- 30 °C ~ 50 °C
      Ambient temperature (storage / transport)- 40 °C ~ 80 °C
      IP classIP54(protection cover)

      Electrical characteristics

      Maximum charge power8KW
      Phase3
      Power contact rated voltage440
      Quantity of signal contacts2
      Signal contact rated current2
      Signal contact rated voltage30
      Signal transmission typePulse width adjustment
      Connection method precautionsCrimp connection, cannot be disconnected
      Temperature measurement2x Pt 1000 (DIN EN 60751)

      Mechanical properties

      Insertion/pullout cycle10000
      Insertion force< 100N
      Pull out force< 100N

      Installation

      Available installation locationInstallation in front of the board
      Limit of the installation locationOnly allow 0 to 90 degrees frontal tilt
      Lock actuator installation locationTop center
      Mounting hole diameter7.00 mm (ø)

      Marking material

      Shell colorblack
      Customization basisProvided according to customer requirements
      Contact surface materialAg
      Marking materialPlastic

      Lock actuator

      Lock typeSecured by locking device after insertion

      Bag

      Dimensionø350*100mm

      Temperature Sensor

      StandardDIN EN 60751
      Recommended measured current1 mA (1 V at 0°C )
      Recommendation to measure tolerance on current sensors±1K
      Temperature range_50 °C ... 150 °C
      Temperature coefficient (TCR)3850 ppm/K
      Long-term stability(maximum R0-Drift)0.06 % (After 1000 hours at 130°C )
      Shutdown temperature90 °C Equivalent to Pt 1000 value 1346.5 Ω

      Environmental Product Compliance

      REACHconform
      China RoHSconform

      Connection capacity

      AWG26~10AWG

      Cable

      Cable composition3*6mm²+2*0.75mm²

      Dimension

      Vehicle connector height101mm(Vehicle charging connector)
      Vehicle connector width75mm(Vehicle charging connector)
      Depth63.2mm
      Hole diameter60mm x 60 mm
      Wire length0m
      width76mm

      CQC parameters

      Overvoltage category/Degree of pollution III/3
      Rated voltage 440V
      Rated current 32A
      IP class IP54
      Numéro de la commande 22060000042
      Unité d'emballage 5pcs/box
      Quantité minimale de commande 5
      Le poid de produit (sans emballage)
      3D
      FGAC-V.stp Télécharger
      CAD Data
      FGAC-T-032A-V-03-0.0M-22A(H).dxf Télécharger
      Data
      FGAC-T-032A-V-03-0.0M-22A(H).pdf Télécharger

      Produit similaire

      Consultation en ligne