Aide à la sélection

WS1.5-QU
11030000065

Spring-cage type Din-Rail TB, connector method: Spring-cage/plug-in connector, Rated voltage: 800 V, Rated current: 18 A, Number of connectors: 4, Number of potentials: 1, Cross section: 0.2 mm² - 1.5 mm², AWG: 28 - 16, Width: 4 mm, Color: gray, Mounting type: NS 35/7.5, NS 35/15

Color
Poles
  1. 01P
Comparaison

Type de produits

Seuls 4 produits peuvent être comparés à chaque fois. Veuillez sélectionner les produits que vous souhaitez remplacer.

    • Aperçu
    • Caractéristiques techniques
    • Accessoires
    • Certification
    • Caractéristiques commerciales
    • Télécharger

    Les certificates des produits

    Les avantages des produits

    ☑spring-cage connection technology, good anti-vibration performance;
    ☑Use an ordinary flat-blade screwdriver, you can easily wire and take the wire;
    ☑Unique plug-in bridge, high circuit connection efficiency;
    ☑Can be matched with marker strips to avoid incorrect insertion of wires。
    1. Modèle 3D
    2. Wiring data
    3. Environmental conditions
    4. IEC Electrical parameters
    5. Environmental protection
    6. Dimension
    7. Overview

    Modèle 3D

    Wiring data

    Strip length8~9mm
    Conductor cross section solid0.2~1.5mm²
    Conductor cross section flexible0.2~1.5mm²
    Conductor cross section solid AWG28~16

    Environmental conditions

    Ambient temperature (operation)-40 °C ~ 105 °C(depending on derating curve)
    Relative humidity (storage/transport)25%~75%

    IEC Electrical parameters

    Rated voltage (III / 3)800V
    Rated current (III / 3)18A
    Rated surge voltage8KV

    Environmental protection

    REACh SVHCLead 7439-92-1
    RoHSNo excessive harmful substances

    Dimension

    NS 35/7,5 Height34.55mm
    End plate width2.5mm
    NS 35/15 Height42.05mm
    length73mm
    width4mm
    Height31.55mm

    Overview

    Connection typePull back spring connection
    Number of rows1
    number of connections4
    Open-end side panelsYes
    Insulation MaterialsPA
    Flame retardant grade, in line with UL 94V0
    1. Marker
    2. Accessories
    3. Installation
    4. Marking & Installation
    5. Accessories

    Marker

    Top marker ZB4 / WB4
    Side marker DEK4
    Marker support DTH3.5-25×3.5 / DTH3.5-25×12
    Warning cover EEA1.5

    Accessories

    Slotted screwdriver size (Blade thickness x Width) 0.4×2.5
    Adjacent jumper (2P) WFA1.5
    Alternate jumper (2P) WFB1.5
    Staggered jumper (2P) /
    End cover D-WS1.5-QU

    Installation

    End clamp E-WS N / E-PC-1100A
    Terminal strip marker support KLM3-20x8 / KLM3-44x8 / DBE-1 / DBE-2
    DIN rail NS35/7.5-1000-00A(H)

    Marking & Installation

    Marking strip ZB4
    Marker cards DBE-1

    Accessories

    End cover D-WS1.5-QU
    Bridge WFA1.5
    End clamp E-WS
    DIN rail NS35/7.5-1000-00A(H)
    Numéro de la commande 11030000065
    Unité d'emballage 100
    Quantité minimale de commande 100
    Le poid de produit (sans emballage) 6.534
    3D
    WS1.5-QU-01P-1Y-00A(H).stp Télécharger
    CAD Data
    WS1.5-QU-01P-1Y-00A(H).dxf Télécharger
    Data
    WS1.5-QU-01P-1Y-00A(H).pdf Télécharger
    Consultation en ligne
    WS1.5-QU_DIN à connexion à ressort _Blocs de jonction rail DIN _DEGSON高松,全球知名工业连接器产品和整体解决方案提供商
    Aide à la sélection

    WS1.5-QU-11030000065

    Spring-cage type Din-Rail TB, connector method: Spring-cage/plug-in connector, Rated voltage: 800 V, Rated current: 18 A, Number of connectors: 4, Number of potentials: 1, Cross section: 0.2 mm² - 1.5 mm², AWG: 28 - 16, Width: 4 mm, Color: gray, Mounting type: NS 35/7.5, NS 35/15

    Color
    Poles
    1. 01P
    Comparaison

    Type de produits

    Seuls 4 produits peuvent être comparés à chaque fois. Veuillez sélectionner les produits que vous souhaitez remplacer.

      • Aperçu
      • Caractéristiques techniques
      • Accessoires
      • Certification
      • Caractéristiques commerciales
      • Télécharger

      Les certificates des produits

      Les avantages des produits

      ☑spring-cage connection technology, good anti-vibration performance;
      ☑Use an ordinary flat-blade screwdriver, you can easily wire and take the wire;
      ☑Unique plug-in bridge, high circuit connection efficiency;
      ☑Can be matched with marker strips to avoid incorrect insertion of wires。
      1. Modèle 3D
      2. Wiring data
      3. Environmental conditions
      4. IEC Electrical parameters
      5. Environmental protection
      6. Dimension
      7. Overview

      Modèle 3D

      Wiring data

      Strip length8~9mm
      Conductor cross section solid0.2~1.5mm²
      Conductor cross section flexible0.2~1.5mm²
      Conductor cross section solid AWG28~16

      Environmental conditions

      Ambient temperature (operation)-40 °C ~ 105 °C(depending on derating curve)
      Relative humidity (storage/transport)25%~75%

      IEC Electrical parameters

      Rated voltage (III / 3)800V
      Rated current (III / 3)18A
      Rated surge voltage8KV

      Environmental protection

      REACh SVHCLead 7439-92-1
      RoHSNo excessive harmful substances

      Dimension

      NS 35/7,5 Height34.55mm
      End plate width2.5mm
      NS 35/15 Height42.05mm
      length73mm
      width4mm
      Height31.55mm

      Overview

      Connection typePull back spring connection
      Number of rows1
      number of connections4
      Open-end side panelsYes
      Insulation MaterialsPA
      Flame retardant grade, in line with UL 94V0
      1. Marker
      2. Accessories
      3. Installation
      4. Marking & Installation
      5. Accessories

      Marker

      Top marker ZB4 / WB4
      Side marker DEK4
      Marker support DTH3.5-25×3.5 / DTH3.5-25×12
      Warning cover EEA1.5

      Accessories

      Slotted screwdriver size (Blade thickness x Width) 0.4×2.5
      Adjacent jumper (2P) WFA1.5
      Alternate jumper (2P) WFB1.5
      Staggered jumper (2P) /
      End cover D-WS1.5-QU

      Installation

      End clamp E-WS N / E-PC-1100A
      Terminal strip marker support KLM3-20x8 / KLM3-44x8 / DBE-1 / DBE-2
      DIN rail NS35/7.5-1000-00A(H)

      Marking & Installation

      Marking strip ZB4
      Marker cards DBE-1

      Accessories

      End cover D-WS1.5-QU
      Bridge WFA1.5
      End clamp E-WS
      DIN rail NS35/7.5-1000-00A(H)
      Numéro de la commande 11030000065
      Unité d'emballage 100
      Quantité minimale de commande 100
      Le poid de produit (sans emballage) 6.534
      3D
      WS1.5-QU-01P-1Y-00A(H).stp Télécharger
      CAD Data
      WS1.5-QU-01P-1Y-00A(H).dxf Télécharger
      Data
      WS1.5-QU-01P-1Y-00A(H).pdf Télécharger
      Consultation en ligne