Aide à la sélection

DS6-MT
11040000205

Disconnect terminal blocks, connector method: Push-in connector, Rated voltage : 500 V,Rated current : 20 A, Number of connectors: 2, Number of potentials: 1, Cross section: 0.2 mm² - 10 mm², AWG: 20 - 8, Width: 8.2 mm, Color: gray, Mounting type: NS35/7.5, NS35/15

Color
Poles
  1. 01P
Comparaison

Type de produits

Seuls 4 produits peuvent être comparés à chaque fois. Veuillez sélectionner les produits que vous souhaitez remplacer.

    • Aperçu
    • Caractéristiques techniques
    • Accessoires
    • Certification
    • Caractéristiques commerciales
    • Télécharger

    Les certificates des produits

    Les avantages des produits

    ☑Disconnect terminal blocks.
    ☑Push-in connection technology, tool-free operation, more convenient and faster;
    ☑With orange wire button, one word or cross screwdriver can release wire.
    ☑The circuit can be disconnected, measured, controlled easily by operate the knife disconnector.
    ☑Equipped with test holes on both sides of the breaking point, convenient for testing the circuit.
    ☑Snap-on knife disconnector to prevent accidental disconnection.
    ☑Universal breaking area to achieve different functions, can insert breaking plug, component plug, fuse plug.
    1. Modèle 3D
    2. Wiring data
    3. Environmental conditions
    4. IEC Electrical parameters
    5. Environmental protection
    6. Dimension
    7. Overview

    Modèle 3D

    Wiring data

    Strip length10~12mm
    Conductor cross section solid0.5~10mm²
    Conductor cross section flexible0.5~6mm²
    Conductor cross section solid AWG20~8

    Environmental conditions

    Ambient temperature (operation)-40 °C ~ 105 °C(depending on derating curve)
    Relative humidity (storage/transport)25%~75%

    IEC Electrical parameters

    Rated voltage (III / 3)500V
    Rated surge voltage6KV

    Environmental protection

    REACh SVHCLead 7439-92-1
    RoHSNo excessive harmful substances

    Dimension

    NS 35/7,5 Height43.5mm
    NS 35/15 Height51mm
    length74.2mm
    width8.2mm
    Height36mm

    Overview

    Connection typeIn line connection
    Number of rows1
    number of connections2
    Open-end side panelsno
    Insulation MaterialsPA
    Flame retardant grade, in line with UL 94V0
    1. Marker
    2. Accessories
    3. Installation

    Marker

    Top marker ZSF8
    Side marker ZSF8
    Marker support /

    Accessories

    Slotted screwdriver size (Blade thickness x Width) mm 0.8x4
    Bridge DFBXX-8.2
    End cover /

    Installation

    End clamp E-WS N / E-PC-1100A
    Terminal strip marker support KLM3-20x8 / KLM3-44x8 / DBE-1 / DBE-2
    DIN rail NS35/7.5-1000-00A(H)
    Numéro de la commande 11040000205
    Unité d'emballage 50
    Quantité minimale de commande 50
    Le poid de produit (sans emballage) 21.02
    3D
    DS6-MT-01P-1Y-00A(H)-C.stp Télécharger
    CAD Data
    DS6-MT-01P-1Y-00A(H)-C-00.dxf Télécharger
    Data
    DS6-MT-01P-1Y-00A(H)-C-00.pdf Télécharger
    Consultation en ligne
    DS6-MT_DIN avec raccordement Push-in _Blocs de jonction rail DIN _DEGSON高松,全球知名工业连接器产品和整体解决方案提供商
    Aide à la sélection

    DS6-MT-11040000205

    Disconnect terminal blocks, connector method: Push-in connector, Rated voltage : 500 V,Rated current : 20 A, Number of connectors: 2, Number of potentials: 1, Cross section: 0.2 mm² - 10 mm², AWG: 20 - 8, Width: 8.2 mm, Color: gray, Mounting type: NS35/7.5, NS35/15

    Color
    Poles
    1. 01P
    Comparaison

    Type de produits

    Seuls 4 produits peuvent être comparés à chaque fois. Veuillez sélectionner les produits que vous souhaitez remplacer.

      • Aperçu
      • Caractéristiques techniques
      • Accessoires
      • Certification
      • Caractéristiques commerciales
      • Télécharger

      Les certificates des produits

      Les avantages des produits

      ☑Disconnect terminal blocks.
      ☑Push-in connection technology, tool-free operation, more convenient and faster;
      ☑With orange wire button, one word or cross screwdriver can release wire.
      ☑The circuit can be disconnected, measured, controlled easily by operate the knife disconnector.
      ☑Equipped with test holes on both sides of the breaking point, convenient for testing the circuit.
      ☑Snap-on knife disconnector to prevent accidental disconnection.
      ☑Universal breaking area to achieve different functions, can insert breaking plug, component plug, fuse plug.
      1. Modèle 3D
      2. Wiring data
      3. Environmental conditions
      4. IEC Electrical parameters
      5. Environmental protection
      6. Dimension
      7. Overview

      Modèle 3D

      Wiring data

      Strip length10~12mm
      Conductor cross section solid0.5~10mm²
      Conductor cross section flexible0.5~6mm²
      Conductor cross section solid AWG20~8

      Environmental conditions

      Ambient temperature (operation)-40 °C ~ 105 °C(depending on derating curve)
      Relative humidity (storage/transport)25%~75%

      IEC Electrical parameters

      Rated voltage (III / 3)500V
      Rated surge voltage6KV

      Environmental protection

      REACh SVHCLead 7439-92-1
      RoHSNo excessive harmful substances

      Dimension

      NS 35/7,5 Height43.5mm
      NS 35/15 Height51mm
      length74.2mm
      width8.2mm
      Height36mm

      Overview

      Connection typeIn line connection
      Number of rows1
      number of connections2
      Open-end side panelsno
      Insulation MaterialsPA
      Flame retardant grade, in line with UL 94V0
      1. Marker
      2. Accessories
      3. Installation

      Marker

      Top marker ZSF8
      Side marker ZSF8
      Marker support /

      Accessories

      Slotted screwdriver size (Blade thickness x Width) mm 0.8x4
      Bridge DFBXX-8.2
      End cover /

      Installation

      End clamp E-WS N / E-PC-1100A
      Terminal strip marker support KLM3-20x8 / KLM3-44x8 / DBE-1 / DBE-2
      DIN rail NS35/7.5-1000-00A(H)
      Numéro de la commande 11040000205
      Unité d'emballage 50
      Quantité minimale de commande 50
      Le poid de produit (sans emballage) 21.02
      3D
      DS6-MT-01P-1Y-00A(H)-C.stp Télécharger
      CAD Data
      DS6-MT-01P-1Y-00A(H)-C-00.dxf Télécharger
      Data
      DS6-MT-01P-1Y-00A(H)-C-00.pdf Télécharger
      Consultation en ligne