Aide à la sélection

FGDC-T-125A-V-0.0M
22060000051

Charging device socket outlet for charging electric vehicles (EVs) with direct current (DC), compatible with the national standard DC vehicle charging device plug for installation in EVs

Comparaison

Type de produits

Seuls 4 produits peuvent être comparés à chaque fois. Veuillez sélectionner les produits que vous souhaitez remplacer.

    • Aperçu
    • Caractéristiques techniques
    • Accessoires
    • Certification
    • Caractéristiques commerciales
    • Télécharger

    Les certificates des produits

    Les avantages des produits

    ☑All Degson's vehicle sockets and charging pile power sockets adopt a unified design
    ☑The surface of power and signal contacts are silver-plated
    ☑Certified to IATF 16949:2016
    ☑Ergonomic and easy to operate
    1. Modèle 3D
    2. Environmental conditions
    3. Electrical characteristics
    4. Mechanical properties
    5. Installation
    6. Marking material
    7. Locking device
    8. Temperature Sensor
    9. Environmental Product Compliance
    10. Cable
    11. Dimension

    Modèle 3D

    Environmental conditions

    Maximum altitude5000m(Above sea level )
    Ambient temperature (operation)- 30 °C ~ 50 °C
    Ambient temperature (storage / transport)- 40 °C ~ 80 °C
    IP classIP55(coupling)

    Electrical characteristics

    Maximum charge power125KW
    93KW
    Phase3
    Power pin quantity9 (DC+,DC-,PE,A+,A-,S+,S-,CCS1,CCS2)
    Power contact rated voltage750
    1000
    Quantity of signal contacts4(S+,S-,CCS1,CCS2)
    Signal contact rated current2
    Signal contact rated voltage30
    Signal transmission typePulse width adjustment
    Connection method precautionsCrimp connection, cannot be disconnected
    Temperature measurement2x Pt 1000 (DIN EN 60751)
    PT1000

    Mechanical properties

    Insertion/pullout cycle10000
    Insertion force<140N
    Pull out force< 140N

    Installation

    Available installation locationInstallation in front of the board
    Limit of the installation locationOnly allow 0 to 90 degrees frontal tilt
    Mounting hole diameter7.00 mm (ø)

    Marking material

    Shell colorblack
    Customization basisProvided according to customer requirements
    Contact surface materialAg
    Marking materialPlastic

    Locking device

    Lock typeSecured by locking device after insertion

    Temperature Sensor

    StandardDIN EN 60751
    Recommended measured current1 mA (1 V at 0°C )
    Recommendation to measure tolerance on current sensors±1K
    Temperature range_50 °C ... 150 °C
    Temperature coefficient (TCR)3850 ppm/K
    Long-term stability(maximum R0-Drift)0.06 % (After 1000 hours at 130°C )
    Shutdown temperature90 °C Equivalent to Pt 1000 value 1346.5 Ω

    Environmental Product Compliance

    REACHconform
    China RoHSconform

    Cable

    Cable composition2 x35 mm² + 1 x 25 mm² + 2 × 4 mm² + 3× 0.75 mm²

    Dimension

    Depth84.2mm
    Hole diameter72 mm x 72 mm
    Wire length0m
    Height95mm

    CQC parameters

    Overvoltage category/Degree of pollution III/3
    Rated voltage 750V
    Rated current 125A
    IP class IP54
    Numéro de la commande 22060000051
    Unité d'emballage 5pcs/box
    Quantité minimale de commande 5
    Le poid de produit (sans emballage)
    3D
    FGDC-V.stp Télécharger
    CAD Data
    FGDC-T-125A-V-03-0.0M-02A(H).dxf Télécharger
    Data
    FGDC-T-125A-V-03-0.0M-02A(H).pdf Télécharger
    Consultation en ligne
    FGDC-T-125A-V-0.0M_Prise de charge du véhicule _Prises de charge _Charge pour l'électromobilité _DEGSON高松,全球知名工业连接器产品和整体解决方案提供商
    Aide à la sélection

    FGDC-T-125A-V-0.0M-22060000051

    Charging device socket outlet for charging electric vehicles (EVs) with direct current (DC), compatible with the national standard DC vehicle charging device plug for installation in EVs

    Comparaison

    Type de produits

    Seuls 4 produits peuvent être comparés à chaque fois. Veuillez sélectionner les produits que vous souhaitez remplacer.

      • Aperçu
      • Caractéristiques techniques
      • Accessoires
      • Certification
      • Caractéristiques commerciales
      • Télécharger

      Les certificates des produits

      Les avantages des produits

      ☑All Degson's vehicle sockets and charging pile power sockets adopt a unified design
      ☑The surface of power and signal contacts are silver-plated
      ☑Certified to IATF 16949:2016
      ☑Ergonomic and easy to operate
      1. Modèle 3D
      2. Environmental conditions
      3. Electrical characteristics
      4. Mechanical properties
      5. Installation
      6. Marking material
      7. Locking device
      8. Temperature Sensor
      9. Environmental Product Compliance
      10. Cable
      11. Dimension

      Modèle 3D

      Environmental conditions

      Maximum altitude5000m(Above sea level )
      Ambient temperature (operation)- 30 °C ~ 50 °C
      Ambient temperature (storage / transport)- 40 °C ~ 80 °C
      IP classIP55(coupling)

      Electrical characteristics

      Maximum charge power125KW
      93KW
      Phase3
      Power pin quantity9 (DC+,DC-,PE,A+,A-,S+,S-,CCS1,CCS2)
      Power contact rated voltage750
      1000
      Quantity of signal contacts4(S+,S-,CCS1,CCS2)
      Signal contact rated current2
      Signal contact rated voltage30
      Signal transmission typePulse width adjustment
      Connection method precautionsCrimp connection, cannot be disconnected
      Temperature measurement2x Pt 1000 (DIN EN 60751)
      PT1000

      Mechanical properties

      Insertion/pullout cycle10000
      Insertion force<140N
      Pull out force< 140N

      Installation

      Available installation locationInstallation in front of the board
      Limit of the installation locationOnly allow 0 to 90 degrees frontal tilt
      Mounting hole diameter7.00 mm (ø)

      Marking material

      Shell colorblack
      Customization basisProvided according to customer requirements
      Contact surface materialAg
      Marking materialPlastic

      Locking device

      Lock typeSecured by locking device after insertion

      Temperature Sensor

      StandardDIN EN 60751
      Recommended measured current1 mA (1 V at 0°C )
      Recommendation to measure tolerance on current sensors±1K
      Temperature range_50 °C ... 150 °C
      Temperature coefficient (TCR)3850 ppm/K
      Long-term stability(maximum R0-Drift)0.06 % (After 1000 hours at 130°C )
      Shutdown temperature90 °C Equivalent to Pt 1000 value 1346.5 Ω

      Environmental Product Compliance

      REACHconform
      China RoHSconform

      Cable

      Cable composition2 x35 mm² + 1 x 25 mm² + 2 × 4 mm² + 3× 0.75 mm²

      Dimension

      Depth84.2mm
      Hole diameter72 mm x 72 mm
      Wire length0m
      Height95mm

      CQC parameters

      Overvoltage category/Degree of pollution III/3
      Rated voltage 750V
      Rated current 125A
      IP class IP54
      Numéro de la commande 22060000051
      Unité d'emballage 5pcs/box
      Quantité minimale de commande 5
      Le poid de produit (sans emballage)
      3D
      FGDC-V.stp Télécharger
      CAD Data
      FGDC-T-125A-V-03-0.0M-02A(H).dxf Télécharger
      Data
      FGDC-T-125A-V-03-0.0M-02A(H).pdf Télécharger
      Consultation en ligne