Aide à la sélection

DC4-MT
11020000187

Screw type Din-Rail TB, connector method: Screw/plug-in connector, Rated voltage: 500 V, Rated current: 20 A, Number of connectors: 2, Number of potentials: 1, Cross section: 0.5 mm² - 4mm², AWG: 22 - 10, Width: 6.1 mm, Color: gray, Mounting type: NS 35/7.5, NS 35/15

Color
Poles
  1. 01P
Comparaison

Type de produits

Seuls 4 produits peuvent être comparés à chaque fois. Veuillez sélectionner les produits que vous souhaitez remplacer.

    • Aperçu
    • Caractéristiques techniques
    • Accessoires
    • Certification
    • Caractéristiques commerciales
    • Télécharger

    Les certificates des produits

    Les avantages des produits

    ☑Disconnect terminal blocks;
    ☑Steel screw connection technology, reliable connection;
    ☑Equipped with dual-channel bridge wells, circuit connection testing is more flexible;
    ☑Unique plug-in bridge, high circuit connection efficiency;
    ☑The box has a baffle to prevent mis-insertion;
    ☑Can be matched with marker strips to avoid incorrect insertion of wires。
    1. Modèle 3D
    2. Wiring data
    3. Environmental conditions
    4. UL Electrical parameters
    5. IEC Electrical parameters
    6. Environmental protection
    7. Dimension
    8. Overview

    Modèle 3D

    Wiring data

    Screw typeSlotted screw
    2 flexible conductors with a TWIN ferrule0.5-1.5mm²
    Conductor cross section flexible (ferrule with plastic sleeve)0.5-2.5mm²
    Conductor cross section flexible (ferrule without plastic sleeve)0.5-4mm²
    Strip length8~9mm
    Conductor cross section solid0.5~6mm²
    Conductor cross section flexible0.5~4mm²
    Conductor cross section solid AWG22~10
    screw threadM3
    Tightening torque0.6N.m

    Environmental conditions

    Ambient temperature (operation)-40 °C ~ 105 °C(depending on derating curve)
    Relative humidity (storage/transport)25%~75%

    UL Electrical parameters

    Rated current16A

    IEC Electrical parameters

    Rated voltage (III / 3)500V
    Rated surge voltage6KV

    Environmental protection

    REACh SVHCLead 7439-92-1
    RoHSNo excessive harmful substances

    Dimension

    NS 35/7,5 Height41.5mm
    End plate width1.5mm
    NS 35/15 Height49mm
    length56.8mm
    width6.1mm
    Height40mm

    Overview

    Connection methodscrew connection
    Number of rows1
    number of connections2
    Open-end side panelsYes
    Insulation MaterialsPA
    Flame retardant grade, in line with UL 94V0
    1. Marker
    2. Accessories
    3. Installation

    Marker

    Top marker /
    Side marker ZB6
    Marker support /

    Accessories

    Slotted screwdriver size (Blade thickness x Width) 0.6×3.5
    Bridge DFA4
    End cover D-DC4-TG
    Partition plate /

    Installation

    End clamp E-WS N / E-PC-1100A
    Terminal strip marker support KLM3-20x8 / KLM3-44x8 / DLM2 / DBE-1 / DBE-2
    DIN rail NS35/7.5 & NS35/15
    Numéro de la commande 11020000187
    Unité d'emballage 50
    Quantité minimale de commande 50
    Le poid de produit (sans emballage) 9.37
    3D
    DC4-MT-01P-1Y-00A(H).stp Télécharger
    CAD Data
    DC4-MT-01P-1Y-00A(H).dxf Télécharger
    Data
    DC4-MT-01P-1Y-00A(H).pdf Télécharger
    Consultation en ligne
    DC4-MT_DC Cage en acier verrouillage TB _Blocs de jonction rail DIN vissé _Blocs de jonction rail DIN _DEGSON高松,全球知名工业连接器产品和整体解决方案提供商
    Aide à la sélection

    DC4-MT-11020000187

    Screw type Din-Rail TB, connector method: Screw/plug-in connector, Rated voltage: 500 V, Rated current: 20 A, Number of connectors: 2, Number of potentials: 1, Cross section: 0.5 mm² - 4mm², AWG: 22 - 10, Width: 6.1 mm, Color: gray, Mounting type: NS 35/7.5, NS 35/15

    Color
    Poles
    1. 01P
    Comparaison

    Type de produits

    Seuls 4 produits peuvent être comparés à chaque fois. Veuillez sélectionner les produits que vous souhaitez remplacer.

      • Aperçu
      • Caractéristiques techniques
      • Accessoires
      • Certification
      • Caractéristiques commerciales
      • Télécharger

      Les certificates des produits

      Les avantages des produits

      ☑Disconnect terminal blocks;
      ☑Steel screw connection technology, reliable connection;
      ☑Equipped with dual-channel bridge wells, circuit connection testing is more flexible;
      ☑Unique plug-in bridge, high circuit connection efficiency;
      ☑The box has a baffle to prevent mis-insertion;
      ☑Can be matched with marker strips to avoid incorrect insertion of wires。
      1. Modèle 3D
      2. Wiring data
      3. Environmental conditions
      4. UL Electrical parameters
      5. IEC Electrical parameters
      6. Environmental protection
      7. Dimension
      8. Overview

      Modèle 3D

      Wiring data

      Screw typeSlotted screw
      2 flexible conductors with a TWIN ferrule0.5-1.5mm²
      Conductor cross section flexible (ferrule with plastic sleeve)0.5-2.5mm²
      Conductor cross section flexible (ferrule without plastic sleeve)0.5-4mm²
      Strip length8~9mm
      Conductor cross section solid0.5~6mm²
      Conductor cross section flexible0.5~4mm²
      Conductor cross section solid AWG22~10
      screw threadM3
      Tightening torque0.6N.m

      Environmental conditions

      Ambient temperature (operation)-40 °C ~ 105 °C(depending on derating curve)
      Relative humidity (storage/transport)25%~75%

      UL Electrical parameters

      Rated current16A

      IEC Electrical parameters

      Rated voltage (III / 3)500V
      Rated surge voltage6KV

      Environmental protection

      REACh SVHCLead 7439-92-1
      RoHSNo excessive harmful substances

      Dimension

      NS 35/7,5 Height41.5mm
      End plate width1.5mm
      NS 35/15 Height49mm
      length56.8mm
      width6.1mm
      Height40mm

      Overview

      Connection methodscrew connection
      Number of rows1
      number of connections2
      Open-end side panelsYes
      Insulation MaterialsPA
      Flame retardant grade, in line with UL 94V0
      1. Marker
      2. Accessories
      3. Installation

      Marker

      Top marker /
      Side marker ZB6
      Marker support /

      Accessories

      Slotted screwdriver size (Blade thickness x Width) 0.6×3.5
      Bridge DFA4
      End cover D-DC4-TG
      Partition plate /

      Installation

      End clamp E-WS N / E-PC-1100A
      Terminal strip marker support KLM3-20x8 / KLM3-44x8 / DLM2 / DBE-1 / DBE-2
      DIN rail NS35/7.5 & NS35/15
      Numéro de la commande 11020000187
      Unité d'emballage 50
      Quantité minimale de commande 50
      Le poid de produit (sans emballage) 9.37
      3D
      DC4-MT-01P-1Y-00A(H).stp Télécharger
      CAD Data
      DC4-MT-01P-1Y-00A(H).dxf Télécharger
      Data
      DC4-MT-01P-1Y-00A(H).pdf Télécharger
      Consultation en ligne